npm Blog (Archive)

The npm blog has been discontinued.

Updates from the npm team are now published on the GitHub Blog and the GitHub Changelog.

npm v7 Series - Why Keep `package-lock.json`?

<< Arborist Deep Dive >> Beta Release!

One common question we’ve gotten a few times now, once we announce that npm v7 will include support for yarn.lock files, is “Why keep package-lock.json at all, then? Why not just use yarn.lock only?”

The simple answer is: because yarn.lock doesn’t fully address npm’s needs, and relying on it exclusively would limit our ability to produce optimal package installs or add features in the future.

Basic Structure of a yarn.lock File

A yarn.lock file is a map of requested dependency specifiers to metadata describing their resolution. For example:

mkdirp@1.x:
  version "1.0.2"
  resolved "https://registry.yarnpkg.com/mkdirp/-/mkdirp-1.0.2.tgz#5ccd93437619ca7050b538573fc918327eba98fb"
  integrity sha512-N2REVrJ/X/jGPfit2d7zea2J1pf7EAR5chIUcfHffAZ7gmlam5U65sAm76+o4ntQbSRdTjYf7qZz3chuHlwXEA==

This says “Any dependency on mkdirp@1.x should resolve to this exact thing”. If multiple packages depend on mkdirp@1.x, they’ll all get the same resolution.

In npm v7, if a yarn.lock file exists, npm will use the metadata it contains. The resolved values will tell it where to fetch packages from, and the integrity will be used to check that the result matches expectations. If packages are added or removed, then the yarn.lock file will be updated.

npm will still create a package-lock.json file, and if a package-lock.json file is present, it’ll be used as the authoritative definition of the tree shape to create.

So if it’s good enough for Yarn, why doesn’t npm just use that?

Deterministic Build Results

Yarn installs are guaranteed to be deterministic given a single combination of yarn.lock and Yarn version. It is possible that a different version of Yarn will result in a different tree layout on disk.

A yarn.lock file does guarantee deterministic resolutions of dependencies. For example, if foo@1.x resolves to foo@1.2.3, it’ll continue to resolve to that version number in subsequent installs for all Yarn versions, given a consistent yarn.lock file. But that (at least, in itself) is not equivalent to guaranteeing a deterministic tree shape!

Consider this dependency graph:

root -> (foo@1, bar@1)
foo -> (baz@1)
bar -> (baz@2)

Either of these package trees would be just as correct as the other:

root
+-- foo
+-- bar
|   +-- baz@2
+-- baz@1

~~ OR ~~

+-- foo
|   +-- baz@1
+-- bar
+-- baz@2

A yarn.lock file can’t tell you which one to use. If the root package (incorrectly, as it’s an unlisted dep) does require("baz"), the result would not be guaranteed by the yarn.lock file. This is a form of determinism that the package-lock.json file can provide, and a yarn.lock file cannot.

In practice, of course, since Yarn has all the required information in the yarn.lock file to make this choice, it is deterministic as long as everyone is using the same version of Yarn, so that the choice is being made in exactly the same way. Code doesn’t change unless someone changes it. To its credit, Yarn is smart enough to not be subject to discrepancies in package manifest load times when building the tree, or else determinism would not be guaranteed.

As this is defined by the particulars of Yarn’s algorithm rather than by the data structure on disk (which does not identify the algorithm to be used), that determinism guarantee is fundamentally weaker than what a package-lock.json provides by fully specifying the shape of the package tree on disk.

In other words, the Yarn tree building contract is split between the yarn.lock file and the implementation of Yarn itself. The npm tree building contract is entirely specified by the package-lock.json file. This makes it much harder for us to break by accident across npm versions, and if we do (whether by mistake or on purpose), the change will be reflected in the file in source control.

Nesting and Deduplication

Furthermore, there is a class of nesting and deduplication cases where the yarn.lock file does not accurately reflect the resolutions that will be used by npm in practice, even when npm does use it as a source of metadata. While npm uses the yarn.lock file as a reliable source of information, it does not treat it as an authoritative set of constraints.

In some cases Yarn produces a tree with excessive duplication, which we don’t want to do. So, following the Yarn algorithm exactly isn’t ideal in these cases.

Consider this dependency graph:

root -> (x@1.x, y@1.x, z@1.x)
x@1.1.0 -> ()
x@1.2.0 -> ()
y@1.0.0 -> (x@1.1, z@2.x)
z@1.0.0 -> ()
z@2.0.0 -> (x@1.x)

The root project depends on version 1.x of x, y, and z. The y package depends on x@1.1 and z@2. z at version 1 has no dependencies, but z at version 2 depends on x@1.x.

The resulting tree shape that npm produces looks like this:

root (x@1.x, y@1.x, z@1.x) <-- x@1.x dep here
+-- x 1.2.0                <-- x@1.x resolves to 1.2.0
+-- y (x@1.1, z@2.x)
|   +-- x 1.1.0            <-- x@1.x resolves to 1.1.0
|   +-- z 2.0.0 (x@1.x)    <-- x@1.x dep here
+-- z 1.0.0

z@2.0.0 depends on x@1.x, and so does the root project. The yarn lock file maps x@1.x to 1.2.0. However, the dependency from the z package, which also specifies x@1.x, will get x@1.1.0 instead.

That is, even though the x@1.x dependency has a resolution in the yarn.lock file stipulating that it should resolve to version 1.2.0, there is a second x@1.x resolution which instead resolves to 1.1.0.

If run with the --prefer-dedupe flag on npm, it’d go a step further, and only install a single instance of x, like this:

root (x@1.x, y@1.x, z@1.x)
+-- x 1.1.0                <-- x@1.x resolves to 1.1.0 for everyone
+-- y (x@1.1, z@2.x)
|   +-- z 2.0.0 (x@1.x)
+-- z 1.0.0

This minimizes duplication, and the resulting package tree is captured in the package-lock.json file.

Because yarn.lock only locks down resolutions instead of locking down the resulting package tree, Yarn produces this tree instead:

root (x@1.x, y@1.x, z@1.x) <-- x@1.x dep here
+-- x 1.2.0                <-- x@1.x resolves to 1.2.0
+-- y (x@1.1, z@2.x)
|   +-- x 1.1.0            <-- x@1.x resolves to 1.1.0
|   +-- z 2.0.0 (x@1.x)    <-- x@1.1.0 would be fine, but...
|       +-- x 1.2.0        <-- Yarn dupes to satisfy yarn.lock resolution
+-- z 1.0.0

The x package appears three times in the Yarn implementation, twice in the default npm implementation, and only once (albeit, not the latest and greatest version) in npm’s --prefer-dedupe algorithm.

All three resulting trees are “correct”, in the sense that every package is getting a version of their dependencies that matches their stated requirements. But, we do not want to create package trees with excessive duplication. Consider what would happen if x was a large package with a lot of dependencies of its own!

So, the only way that npm can optimize a package tree, while maintaining deterministic reproducible builds, is to use a fundamentally different sort of lock file.

Capturing Results of User Intent

As mentioned above, in npm v7, a user can use --prefer-dedupe to have the tree generation algorithm prefer deduplication rather than always updating to latest. This is usually best in any scenario where duplication should be minimized.

If that config flag is set, then the resulting tree for the example above would look like this:

root (x@1.x, y@1.x, z@1.x) <-- x@1.x dep here
+-- x 1.1.0                <-- x@1.x resolves to 1.1.0 for everyone
+-- y (x@1.1, z@2.x)
|   +-- z 2.0.0 (x@1.x)    <-- x@1.x dep here
+-- z 1.0.0

In this case, npm sees that, even though x@1.2.0 is the latest package version that satisfies the x@1.x requirement, choosing x@1.1.0 instead would still be acceptable, and would result in less duplication.

Without capturing the tree shape in the lockfile, every user working on the project would have to configure their client exactly the same way to get the same results. When the “implementation” can be changed by the user in this way, this gives them a lot of power to optimize for their specific conditions. But, it also makes deterministic builds impossible if the contract is implementation-dependent, which yarn.lock is.

Other examples where the algorithm would be different are:

Capturing the result of resolutions, and relying on the algorithm to be consistent, doesn’t work when we give the user the ability to tweak the package installation algorithm in use.

Locking down the resulting tree shape allows us to ship features like this without breaking our contract to provide deterministic reproducible builds.

Performance and Data Completeness

The package-lock.json file is not only useful for ensuring deterministically reproducible builds. We also lean on it to track and store package metadata, saving considerably on package.json reads and requests to the registry. Since the yarn.lock file is so limited, it doesn’t have the metadata that we need to load on a regular basis.

In npm v7, the package-lock.json file contains everything npm will need to fully build the package tree. (This data is spread out in npm v6, so when we see an older lockfile, we have to do a bit of extra digging up front, but that’s a one-time hit.)

So, even if it did capture tree shape, we’d still have to use a file other than yarn.lock to track this extra metadata.

Future Possibilities

Approaches to package dependency layout on disk such as pnpm, yarn 2/berry, and Yarn’s PnP, can change the context of this calculation considerably.

We intend to explore a virtual file system approach in npm v8, modeled on Tink, the proof of concept Kat Marchán wrote in 2019. We’ve also talked about migrating to something like pnpm’s layout structure, though this is in some ways an even bigger breaking change than Tink would be.

If all dependencies are stored in a central location, and only simulated in their nested locations via symbolic links or a virtual filesystem, then modeling the tree shape is far less of a concern. However, we’d still need more metadata than the yarn.lock file provides, and thus, it would make more sense to update and streamline our existing package-lock.json format rather than rely on yarn.lock.

This is Not a “Considered Harmful” Post

I want to be very clear that, as far as I’ve ever been able to determine, Yarn reliably produces correct package dependency resolutions. And, for a given Yarn version (all recent Yarn versions, as of this writing), it is fully deterministic, just like npm.

While it is good that the yarn.lock file is sufficient for a specific version of Yarn to generate deterministic builds, relying on an implementation-dependent contract is not acceptable for use across multiple tools. This is all the more true by virtue of the fact that the implementation and yarn.lock format are not documented or specified in any formal way. (This isn’t a dig on Yarn; npm’s aren’t either. Doing so will be quite a bit of work.)

The best way to fully ensure build reliability and strict determinism for the long term is to lock down the results of the build process in the contract itself, rather than naively trusting that future implementations will continue to make the same choices, and effectively limiting our ability to design an optimized package tree.

Deviations from that contract must be a result of explicit user intent, and self-documenting by virtue of updating the saved contract on completion.

Only package-lock.json or something like it can provide this functionality for npm.

<< Arborist Deep Dive >> Beta Release!